What is Universal Tensile Testing Machine(UTM)?
A universal testing machine (UTM), also known as a universal tester, materials testing machine or materials test frame, is used to test the tensile strength and compressive strength of materials. An earlier name for a tensile testing machine is a tensometer.
Standards
ASTMA370, ASTME4, ASTME8, ASTME9, ISO6892, ISO7438, ISO7500-1, EN10002-4, GB/T228, GB16491, HGT3844, QB11130, GB13-22, HGT3849, GB6349, GB/T1040.2, ASTM C165, EN826, EN1606, EN1607, EN12430 etc.
Functions of Universal Tensile Testing Machine:
-Automatic zeroing
-Auto return
-Automatic disk saving
-The testing process, measurement, display and analysis are all finished by microcomputer
-The data and curves are displayed dynamically with the experimental process.
-Experimental results can be re analyzed with arbitrary access.
-After the test is completed, the force and deformation data of the test curve can be found at point by point.
-Program control and mechanical dual protection function;
-Overload protection function;
-Emergency shutdown function;
-The tensile, compression, bending, shearing, adhesion, stripping and tear tests of the material can be carried out.
Technical Specifications
Software introduction for Universal Tensile Testing Machine :
According to different configuration parameters, Maxtest program is suitable for different types of material testing machines, such as microcomputer controlled electronic universal testing machine,microcomputer screen display universal testing machine, microcomputer controlled electro-hydraulic servo universal testing machine, etc. The Maxtest program has some differences in local man-machine interface and use. The data acquisition test card is a PC built-in PCl test card based on PCI interface, which meets the specification of PCI 2.1. The card can be directly inserted into any PCl slot of the microcomputer. After the signal is digitized, it is connected to the CPLD chip to complete the high-speed signal processing, and then directly connected to the testing machine through simple wiring, so as to realize the automatic measurement and control of the microcomputer, and truly realize the plug and play test, greatly simplifying the circuit structure and improving the reliability. The software can be connected with PC, convenient to use.