High Accuracy Glass Bottle Internal Pressure Tester Suppliers

Specification: 0.4-0.58±0.1Mpa/s(5.8±1bar/s)
Test Accuracy: ±0.5%
Ramp pressure: 50kg
Test Range: 0 ~ 6 MPa
Tags:

Brief Introduction 

Glass bottle internal pressure tester BIP-03 is used for test bottle internal pressure for all kinds of beer bottles, wine bottles, beverage bottles, infusion bottle, antibiotic resistance bottle.

Technical Features

- Double test mode completely meet standard requirements

- Discard the traditional complex hydraulic system ,Reduce the leakage rate, easy to maintain 

- Constant pressure keeping test and supercharge non-pressure test

- One key operation, display the whole test process

- Equipped with micro-printer to print test result fast.

Test Principle

Hydraulic pump pressure driven by servo motor through the pipeline, respectively to the pressure sensor and the tested samples of glass bottles in equivalent manner, equipment controller from pressure sensor collect real time signal, and according to the pressure signal value control hydraulic pump driven by servo motor system in linear supercharging pressure changes until reach the preset values, in the process of pressure or holding pressure. If the tested sample bottle is broken, it is not qualified; if automatic relief after the end of the test system, the tested sample bottle is still in good condition, it viewed as a qualified.

Applications

Basic Application Glass Bottles

Technical Specifications

Item BIP-03
Test Range ~ 6 MPa
Resolution 0.001MPa
Test Accuracy ±0.5%
Ramp pressure 0.4-0.58±0.1Mpa/s(5.8±1bar/s)
Instrument Dimension 600mm(L)×450mm(W)×1600mm(H)
Net Weight 50kg

Standards    

GB/T 4546-2008, YBB00172003

Configuration

Standard Configuration Instrument, Micro-printer


Request For Quotation