High and low temperature universal testing machine

Test temperature: -180~300℃, -80~250℃, -70~250℃, -40~250℃, 0~500℃
Temperature control meter accuracy: 0.1 class/ 0.2 class
Humidity range: 10%~95RH
Payment Terms: TT , LC , Others


The high and low temperature universal testing machine  combined with high and low temperature material mechanics testing machine is used for high and low temperature tensile, compression, bending, shear, fatigue and other tests of rubber and plastic composite materials, providing high stable environmental temperature and ensuring reliable test results

The main technical parameters of the test high and low temperature environmental Box  :

Test temperature: -180~300℃, -80~250℃, -70~250℃, -40~250℃, 0~500℃, etc.;

Humidity range: 10%~95RH.

Temperature accuracy: ±1℃, ± 2℃.

Uniformity: ±2℃, ±3℃. 

Temperature control meter accuracy: 0.1 class, 0.2 class.

Low temperature refrigeration method: liquid nitrogen refrigeration, compressor refrigeration, dual compressor refrigeration.

high temperature heating method: high temperature heating element heating.

Temperature control method: using PlLc module + temperature module + FULE control software + LCD touch control screen.

Operation mode: constant operation, timing operation.

Temperature control mode: PID control, solid state relay output; 2.11 wind circulation mode: centrifugal fan, forced internal circulation of bad luck wind.

Test chamber space: 300mm, 500mm, 600mm, 800mm, 900mm can be customized.

Safety protection device: blower motor overload protection, leakage protection, fuse protection, instrument standby operation protection, etc. 

universal testing machine high and low temperature box can be used with fule high and low temperature tensile testing machine / high and low temperature compression testing machine and FULE measurement and control system use.

Main features:

The FL high and low temperature test chamber has low operating vibration and good long-term operating stability.

There are many temperature range versions and a complete range, suitable for a variety of testing machine types.

It can be used with the high and low temperature deformation measuring device of optical video extensometer to test the elastic modulus of high and low temperature stress and strain of materials.

The large-area visible glass window is equipped with LED lighting to observe the operation of the test.


ASTMA370, ASTME4, ASTME8, ASTME9, ASTMD2344, ASTMD3039, ASTMD6641, ISO 14125 ISO6892, ISO7438, ISO7500-1, EN10002-4, GB/T228, GB16491, HGT3844, QB11130, GB13-22, HGT3849, GB6349, GB/T1040.2,ASTM C165, EN826, EN1606, EN1607, EN12430 etc.

Technical Features

◆ Floor-type and double space structure table, standard model for upper space stretch, lower space compression and bending.

◆ Equipped with brand business computer and A4 brand printer.

◆ A high precision tension-compression type sensor is standard, and multiple load sensors can be expanded.

◆ The built-in controller is adopted to ensure the control of isokinetic displacement

◆ Stable and reliable performance due to the use of AC servo motor

◆ The experimental results can be obtained in automatic and manual, form report form automatically, the data analysis process is simple

◆ Overload protection: automatic stop when 3~5% of the maximum value of each gear is exceeded

◆ Beam travel protection: Double protection of electronic limit and program control.

Installation Conditions 

1. Temperature within the range 0℃~50℃

2. Relative humidity lower than 95%

3. Noise level 25 DB

4. In an environment without obvious magnetic interference and surrounding non-corrosive media

5. In a shock-free, vibration-free environment

6. Leave space not less than 0.7m around the tester, clean and dust-free work environment

7. The base and rack are properly installed on a solid level base

Technical Specifications









Max Testing Force(KN)








Accuracy Class

Class 1/ Class 0.5

Force Measurement Range

 Standard :2%~100%FS; Optional:0.4%~100%FS

Accuracy OTest Force

within ±0.5%

Speed Accuracy

within ±0.5% set speed

Displacement Accuracy

within ±0.5%

Resolution ODisplacement


Deformation Measurement System

Standard: Gauge length 50mm,Deformation range 10mm (can be customized)

Deformation Measurement Range


Deformation Measurement Accuracy

Within ±0.5%  

Tensile Space(mm)

700 (can be customized)

Compression Space(mm)

700 (can be customized)

Test Width(mm)

Standard:360mm,400mm,520mm(can be customized)

Beam Travel Distance






Power Supply

AC220V,50Hz(can be customized)


One set of tensile compression bending test clamp(can be customized)


Various tensile compression bending test clamp can be configured according to user requirements.(can be customized)

Request For Quotation